Discover the SMOK MAG P3 Mini 80W Starter Kit, featuring a 3000mAh internal battery, IP67 construction rating, and is paired with the SMOK TF Sub-Ohm Tank. Holding up to 6mL of eJuice within the confines of the TF Tank, the SMOK Mag P3 Mini can deliver delicious clouds of flavor up to an 80W ceiling. Powered by an internal 3000mAh rechargeable battery, the MAG P3 Mini can respond in 0.001s when fired, producing magnificent vapor instantaneously. Constructed from durable zinc-alloy and enveloped in soft rubber coating, the MAG P3 Mini is impervious to light falls and drops and maintains a IP67 rating that makes it shock, dust, and waterproof.

SMOK MAG P3 MINI 80W Box Mod Features:
Dimensions – 82mm by 58.5mm by 35.1mm
Integrated 3000mAh Rechargeable Battery
Wattage Output Range: 1-80W
Voltage Output Range: 0.5-9V
Resistance Range: 0.10-2.5ohm
Firing Speed – 0.001s
Zinc-Alloy Chassis Construction
Rubberized Outer Coating
IP67 Protection – Water, Dust, Shockproofing
Intuitive Firing Button
Two Adjustment Buttons
0.96″ TFT Display
Low/High Battery Protection
Low/High Resistance Protection
Short-Circuit Protection
Temperature Protection
10S Overtime Protection
MicroUSB Port
Threaded 510 Connection
Available in Red-Black, Blue-Black, and Grey-Black

SMOK TF Sub-Ohm Tank Features:
25mm Base Diameter
30mm At Widest Point
Weight – 75g
6mL Maximum Juice Capacity – Convex Glass Extension
Superior Stainless Steel Construction
High-Grade Glass Reinforcement
High-Temperature Resistant – Explosion Proof
TF Tank BF Coil Technology
0.25ohm TF BF-Mesh Coils – rated for 30-80W
0.5ohm TF Ceramic Coils – rated for 30-60W (Sold Separately)
Plug-and-Pull Design
Convenient Top-Fill Rotary Design – Lock Button Mechanism
Massive Dual Adjustable Airflow Control at Base
810 Cobra Resin Ultra-Wide Drip Tip
Plug-Pull Coil System
Antibacterial Medical Cotton
510 Connection

Includes:
1 MAG P3 Mini Mod (300mAh)
1 TF Tank (6ml)
1 TF Tank BF-Mesh Coil 0.25ohm (Pre-installed)

1 TF Tank BF-Mesh Coil 0.25ohm
1 Silicone Bulb Glass Protective Sleeve
1 Glass Tube Replacement
1 USB Cable
1 User Manual

Discover the FreeMaX MAXUS 200W Starter Kit, featuring the FM CHIP-MAXUS 1.0 Chipset, single or dual battery, and comes with the Maxus Pro Sub-Ohm Tank. Constructed from durable zinc-alloy, the chassis of the MAXUS 200W Starter Kit is decorated in visually striking resin panels. Outfitted with the FM Chip-Maxus 1.0 Chipset, the MAXUS Kit can deliver an instantaneous firing speed of 15ms. Operating off a single OR dual battery, the FreeMaX Maxus will have a wattage output range of 5-80W or 5-200W, respectively. In addition, the batteries can be installed in any direction thanks to the SmartLoad Technology, making this a great starter kit for beginners. Paired with the FreeMaX Maxus Pro Sub-Ohm Tank , the MAXUS delivers delicious vapor with the new 904L Mesh Coils that heat eJuice rapidly and evenly thanks to the mesh coil heating element. With the ability to access more advanced firing modes, the MAXUS Starter Kit pairs neatly with nickel, titanium, and stainless steel wires for advanced firing modes for seasoned vapers.

FreeMaX MAXUS 200W Starter Kit Features:
-FM CHIP-MAXUS 1.0 Chipset
-Dimensions – 150mm by 52.5mm by 29mm
-Single or Dual High Amp 18650 Battery – Not Included
-SmartLoad Technology – No Polarity, Load At Will
-Wattage Output Range – Single Battery: 5-80W
-Wattage Output Range – Dual Battery: 5-200W
-Output Voltage Range: 0.7-8.4V
-Resistance Range: 0.1-3.0ohm
-Temperature Range: 100-315°C / 200-600°F
-15ms Firing Speed
-Power Mode
-VPC Mode
-BYPASS Mode
-TC Mode
-TCR Mode
-Titanium, Nickel, Stainless Steel Wire Compatibility
-Zinc-Alloy Chassis Construction
-Single Firing Button
-OLED Display Screen
-Magnetic Battery Door
-Two Adjustment Button
-Low Resistance Range
-10s Timeout Protection
-Open Circuit Protection
-High-Temp Protection
-Low Voltage Protection
-Short-Circuit Protection
-Automatic Coil Test
-Same/New Coil Selection
-Type-C USB Port
-Threaded 510 Connection

FreeMaX Maxus PRO Sub-Ohm Tank Features:
-27mm Diameter
-5mL Bubble Glass Capacity
-Pyrex Glass Reinforcement
-Superior 304 Stainless Steel Tank Construction
-Sliding Top Fill System – Single Fill Port
-FreeMaX Maxus Pro Coil Series
-0.15ohm 904L M1 Mesh Coils – rated for 40-70W
-0.2ohm 904L M2 Mesh Coils – rated for 60-90W
-FM CoilTech 4.0
-Tea Fiber Cotton Wicking Material
-Threaded Coil Installation
-Dual Slotted Bottom Airflow Control Ring
-810 Widebore Drip Tip
-Threaded 510 Connection